Electrical Compliance & Safety Checks

Electrical Compliance & Safety Checks in Perth

Expert Electrical Compliance & Safety Checks Perth

When it comes to electrical safety, guessing is never good enough. At Advanced Electrical and Energy Solutions, we provide professional electrical compliance and safety checks in Perth for homes, rental properties, offices, shops, warehouses and commercial premises. Our goal is simple: to help you make sure your electrical systems are safe, functional and aligned with current requirements.

With over 20 years of experience, our team provides practical, honest, and high-quality electrical services supported by proper licensing, expert workmanship, and clear communication. We work with homeowners, landlords, property managers, business owners, and builders who seek confidence that their installation is in good condition and that any risks are identified early.

Whether you’re preparing a property for sale, organising a rental compliance check, managing a commercial site, dealing with an ageing switchboard, or simply seeking peace of mind, we perform thorough inspections and provide clear reports so you know exactly where your property stands.

In Western Australia, electrical work must be performed by a properly licensed person, and electrical installation work generally requires an electrical safety certificate issued by the contractor. WA guidance also states that an electrical contractor licence is identified by the prefix EC, which is relevant here because our licence is EC16860.

If you need trusted electrical compliance and safety checks in Perth, call us on 0469 800 094 or send an enquiry through our contact form or email admin@advancedelectricalperth.com.au.

Why electrical compliance and safety checks matter

Electrical systems often develop problems gradually. A loose connection, damaged fitting, overloaded circuit, failing RCD, deteriorated cable, non-compliant smoke alarm, or outdated switchboard may not always show obvious signs immediately. However, small electrical issues can become major hazards if ignored.

A professional safety check helps identify risks early on, preventing costly or dangerous issues. It also provides property owners with clarity on what is functioning correctly, what may require attention, and what should be upgraded to boost safety and compliance.

Our Perth electrical compliance checks are designed to help reduce the risk of:

For many clients, the true value lies in peace of mind. You want to be confident that your power points, lighting circuits, switchboard protections, and essential safety devices are functioning properly. You also want a licensed electrician to provide clear, honest answers rather than vague guesses.

What Does a Comprehensive Electrical Safety Check Involve?

Our thorough inspection process is designed to identify hidden hazards and ensure every part of your electrical system operates safely and effectively. We go beyond a quick look, using advanced testing tools to confirm the integrity of your system.

1. Switchboard and Circuit Protection

The switchboard is the core of your property’s electrical system. During our safety check, we carefully inspect it for:

Compliance with current standards: Ensuring your board is up to date.
Safety Switch (RCD) functionality: We test all Residual Current Devices to ensure they trip within the required time frame, protecting you from electric shock.
Overloaded circuits: Identifying circuits that are carrying too much load, which can lead to overheating and fires.
Loose connections and heat damage: A common fire hazard that is invisible to the untrained eye.
If your switchboard is outdated, we will recommend a switchboard upgrade to enhance safety and capacity.

2. Residual Current Device (RCD) Testing

In Western Australia, RCDs (safety switches) are compulsory on all final sub-circuits to protect you from electrocution. We don’t just check if they are installed; we perform a trip-time test to confirm they are functioning properly. If your property has older models or needs extra protection, we can advise on the best RCD setups to keep you safe.

3. Visual Inspection of All Components

Our electricians conduct a room-by-room visual assessment, checking:

Power Points: Looking for damage, discolouration (a sign of arcing), or loose fittings.
Lighting: Ensuring all fittings are secure and functioning correctly.
Smoke Alarms: Verifying that your smoke alarms are within their expiry date, correctly positioned, and interconnected as required by law. We can install new, compliant alarms if needed.
Ceiling Fans: Checking for stability and safe operation.

4. Fault Finding and Testing

Not all electrical faults are visible. We use diagnostic tools to find hidden issues like earth leakage, insulation breakdown, and high resistance connections. Our expert fault finding ensures that intermittent problems are fixed permanently, stopping them from becoming major hazards.

Residential electrical safety checks in Perth

Your home should feel secure, not uncertain. Many residential electrical problems begin quietly in the background and go unnoticed until something trips, stops working, or becomes dangerous.

Our residential electrical safety checks are ideal if:

Your home is older
Your switchboard has not been upgraded in many years
Lights flicker or dim
Breakers or RCDs trip frequently
Power points feel warm
You have recently purchased a property
You are preparing to sell
You are planning renovations
You want peace of mind for your family

We inspect the condition of the installation, identify obvious hazards, assess safety devices, and explain any upgrades that could enhance safety and reliability. If your property has older wiring, limited RCD coverage, deteriorated fittings, or non-compliant smoke alarms, we can recommend practical next steps.

In WA, people selling a home must ensure compliant RCDs and smoke alarms are installed before transferring ownership. Smoke alarms generally need to be mains powered, operational, and less than 10 years old, while RCDs should protect the relevant lighting and power circuits.

Rental property electrical compliance in Perth

Rental properties require special care because electrical safety is a concern landlords must never ignore. Our rental property compliance checks offer a clear, professional service for landlords and property managers.

In WA, rental homes must have two RCDs installed on the switchboard before they can be leased, and compliant smoke alarms must be in place before sale, rent, or hire. For rental homes, smoke alarms must stay in working condition, be permanently connected to mains power unless an exception applies, and be less than 10 years old.

We help by checking:

RCD presence and condition
Smoke alarm age and operation
Switchboard safety
Visible electrical defects
Damaged accessories
Concerns raised by tenants or property managers
overall electrical condition relevant to tenancy safety

This service is especially useful between tenancies, before leasing, after repairs, during routine maintenance planning, or when a property manager wants issues addressed before they become urgent.

Electrical safety certificates and documentation

A lot of property owners ask us about certificates. This is an important part of electrical compliance in WA.

According to WA Government guidance, when electrical installation work is undertaken, excluding maintenance and like-for-like equipment replacements, the electrical contractor must provide the customer with an electrical safety certificate within 28 days. WA guidance states this certificate confirms that the work was performed by a licensed electrical contractor, is safe, and complies with safety standards.

The WA Government also states that electrical contractors must provide electrical safety certificates for electrical work, and that these documents certify the work has been checked, tested and complies with the relevant regulations and technical standards, including AS/NZS 3000:2018 Wiring Rules.

That matters because clients want more than verbal reassurance. They want confidence that the work has been done properly and that the required documentation is handled correctly.

When you use us, you are dealing with a licensed electrical contractor. We take compliance seriously, we explain what work is being done, and where a certificate is required, we make sure the process is handled properly.

Signs you may need an electrical compliance or safety check

Some people book a safety inspection because they are legally required to address a property issue. Others book because something simply does not feel right.

You should consider an electrical safety check if:

your switchboard looks outdated
your RCD keeps tripping
your lights flicker
you smell burning near switches or outlets
sockets are loose, damaged or discoloured
power cuts happen in one part of the property
smoke alarms are old or unreliable
you are unsure if your rental property is compliant
you are selling a home
you are purchasing an older property
your business premises have not been professionally checked in some time
you want to identify risks before they become costly

Electrical problems do not always announce themselves loudly. Often, the smartest time to inspect is before something fails.

Why Choose Advanced Electrical
and Energy Solutions

Easy booking and fast support via call 0469 800 094, email info@advancedelectricianperth.com.au, or our online contact form for quick quotes and scheduling.

Frequently Asked Questions

What is included in an electrical compliance and safety check in Perth?

An electrical compliance and safety check generally involves inspecting the switchboard, RCD safety switches, smoke alarms, power points, lighting circuits, and visible signs of damage or non-compliance. The specific scope varies depending on whether the property is residential, rental, or commercial. At Advanced Electrical and Energy Solutions, we customise the inspection to suit your property and clearly explain if any repairs, upgrades, or further testing are required.

Do I need electrical safety checks before renting out a property in Perth?

Yes, rental properties in WA must meet key electrical safety standards. WA guidelines specify that a rental home needs two RCDs installed before leasing, and compliant smoke alarms must be installed and maintained. Smoke alarms are typically mains powered, functional, and less than 10 years old.

Do I need compliant smoke alarms and RCDs before selling my home in Perth?

Yes. WA guidance states that homes being sold must have properly installed RCD protection on circuits supplying power points and lights before transfer of ownership, and smoke alarms must be compliant, in working order, mains powered, and not more than 10 years old.

How often should RCDs be tested?

For rental homes, WA consumer guidance states tenants should test RCDs every three months and report any faults, while faulty RCDs must be replaced immediately. For workplaces, WorkSafe WA states RCDs need to be tested regularly by a competent person, with frequency determined by risk assessment or advice from a qualified individual.

What is an electrical safety certificate in WA?

An electrical safety certificate is a document issued by the electrical contractor for applicable electrical installation work. WA guidance says it confirms the work was carried out by a licensed contractor, is safe and complies with safety standards. For eligible work, the certificate must be given to the customer within 28 days.

Can you check older homes in Perth for electrical safety?

Yes. Older homes are some of the most important properties to inspect because they may have ageing switchboards, limited RCD protection, worn fittings, or other outdated electrical components. We offer practical electrical safety checks for older Perth homes and can recommend upgrades where necessary to enhance safety and reliability.

Do businesses in Perth need electrical compliance checks?

Commercial properties should take electrical safety seriously. While requirements vary by site and use, WorkSafe WA makes clear that workplaces have duties to manage electrical risks, and RCDs used in workplaces must be tested regularly by a competent person.

How much do electrical compliance and safety checks cost in Perth?

The price varies depending on the type of property, the size of the installation, whether it is residential or commercial, and whether you require a basic compliance check or a more detailed fault finding and testing. The best way to get an accurate quote is to contact us with your property details. We will provide you with clear advice and a straightforward quote based on your actual needs.

Why should I use a licensed electrician for compliance checks?

In WA, electrical work must be performed by a person holding the relevant electrical licence, and contractor licences are marked with the prefix EC. Using a licensed electrician helps ensure the work is completed safely, tested properly, and documented correctly where required.

Do you provide electrical compliance and safety checks across Perth?

Yes. We offer electrical compliance and safety inspections for residential and commercial clients across Perth. Whether you need a landlord safety check, a pre-sale inspection, a switchboard review, or a commercial compliance assessment, we can assist.