Electrical Fault Finding

Electrical Fault Finding and Electrical Repairs Perth – 24/7 Emergency Electrician

Licensed Perth Electricians for Fast, Safe and Reliable Electrical Fault Repairs

When something goes wrong with your power, lighting, switchboard, safety switch, circuit breaker or electrical system, you need a licensed electrician who can find the fault properly and repair it safely. At Advanced Electrical and Energy Solutions, we provide professional electrical fault finding and electrical repairs in Perth for homes, businesses, rental properties, offices, shops, workshops, and commercial sites.

With over 20 years of electrical industry experience, our team understands how stressful electrical problems can be. A tripping RCD, flickering lights, a burning smell, a faulty power point, damaged wiring, a power outage, or a switchboard fault should never be ignored. Electrical issues can quickly become dangerous if they are left untreated or repaired by the wrong person.

We are a fully licensed Perth electrical contractor (EC16860), providing reliable residential and commercial electrical services throughout Perth and the surrounding suburbs. Our electricians are trained to accurately diagnose problems, explain issues clearly, and deliver safe, long-lasting repairs that meet Australian electrical standards.

Whether you need urgent fault-finding, emergency electrical repairs, switchboard troubleshooting, safety switch repairs, power point repairs, lighting fault repairs, circuit testing, or comprehensive electrical troubleshooting, we are ready to help.

For fast and professional assistance, contact Advanced Electrical and Energy Solutions today.

Call: 0469 800 094, Email: admin@advancedelectricianperth.com.au Or send an enquiry through our website contact form.

What Is Electrical Fault Finding?

In simple terms, electrical fault finding is the systematic process of identifying the root cause of an electrical problem rather than just treating the symptom. While resetting a tripped safety switch might restore your lights for a few hours, it does not fix the underlying issue. Perhaps a cable has been damaged by rodents in the roof space. Maybe a decades-old joint in a junction box is slowly breaking down. Or it could be a faulty appliance leaking current to earth.

Our licensed electricians use calibrated test equipment, insulation resistance testers, clamp meters, and continuity testers to methodically work through each circuit until we isolate the fault. We do not guess. We test, measure, and verify. The result is an accurate diagnosis that enables us to repair the specific problem, rather than replacing parts on a hunch and hoping for the best.

Common faults we find and repair every week across Perth include:

RCD (safety switch) nuisance tripping or failure to reset
Partial power loss affecting one room or several circuits
Burning smells, scorch marks, or discoloured power points and switches
Lights that flicker, buzz, or dim when an air conditioner or pool pump starts

Whether you are in a 1960s double-brick home in Morley with its original wiring, a modern two-storey home in Baldivis, or running a café in Fremantle with equipment that keeps tripping the board, our fault-finding process is the same: systematic, thorough, and designed to leave you with a permanent solution.

Why Electrical Faults Should Never Be Ignored

Electrical faults are more than just inconvenient. They can signal a deeper problem within your wiring, switchboard, safety switch, appliance circuit or electrical installation. A small fault today can become a serious hazard tomorrow if left unchecked.

Common warning signs of an electrical fault include:

Power keeps turning off unexpectedly
Safety switch keeps tripping
Circuit breaker trips when appliances are used
Lights flicker or dim
Power points feel warm
Switches make crackling or buzzing sounds
You notice a burning smell
Sparks appear when using a switch or outlet
Appliances stop working on certain circuits
Outdoor lights or power points stop working after rain
Only one section of the home or business has power
The switchboard looks old, damaged or overloaded

If you notice any of these signs, stop using the affected outlet, switch or circuit and contact a licensed electrician. Our team can inspect the system, isolate the fault and provide a safe repair.

Residential electrical safety checks in Perth

Your home should feel secure, not uncertain. Many residential electrical problems begin quietly in the background and go unnoticed until something trips, stops working, or becomes dangerous.

Our residential electrical safety checks are ideal if:

Your home is older
Your switchboard has not been upgraded in many years
Lights flicker or dim
Breakers or RCDs trip frequently
Power points feel warm
You have recently purchased a property
You are preparing to sell
You are planning renovations
You want peace of mind for your family

We inspect the condition of the installation, identify obvious hazards, assess safety devices, and explain any upgrades that could enhance safety and reliability. If your property has older wiring, limited RCD coverage, deteriorated fittings, or non-compliant smoke alarms, we can recommend practical next steps.

In WA, people selling a home must ensure compliant RCDs and smoke alarms are installed before transferring ownership. Smoke alarms generally need to be mains powered, operational, and less than 10 years old, while RCDs should protect the relevant lighting and power circuits.

Rental property electrical compliance in Perth

Rental properties require special care because electrical safety is a concern landlords must never ignore. Our rental property compliance checks offer a clear, professional service for landlords and property managers.

In WA, rental homes must have two RCDs installed on the switchboard before they can be leased, and compliant smoke alarms must be in place before sale, rent, or hire. For rental homes, smoke alarms must stay in working condition, be permanently connected to mains power unless an exception applies, and be less than 10 years old.

We help by checking:

RCD presence and condition
Smoke alarm age and operation
Switchboard safety
Visible electrical defects
Damaged accessories
Concerns raised by tenants or property managers
overall electrical condition relevant to tenancy safety

This service is especially useful between tenancies, before leasing, after repairs, during routine maintenance planning, or when a property manager wants issues addressed before they become urgent.

Our Electrical Fault-Finding Process

Diagnosing electrical faults isn’t about guessing or replacing parts until something works. It’s a methodical, evidence-based process, and that’s exactly how we approach every job. Here’s what you can expect when you book us for electrical fault-finding in Perth:

Step 1: Listen and Understand

Every fault has a story. We start by asking you what's happening, when it started, what you were doing when it began, and whether it's intermittent or constant. The more we understand the symptoms, the faster we can pinpoint the cause.

Step 2: Visual and Safety Inspection

Before we plug anything in or start testing, we conduct a thorough visual inspection of your switchboard, the affected area, and any visible wiring or fittings. We look for signs of scorching, water damage, rodent activity, loose connections, and physical damage.

Step 3: Diagnostic Testing

This is where our experience and equipment really matter. We use professional-grade insulation resistance testers, multimeters, clamp meters, thermal imaging cameras (where appropriate), and circuit tracers to isolate the fault. We test live circuits, dead circuits, earthing systems, and individual components systematically.

Step 4: Identify the Root Cause

We don't just find what's failed; we find out why. Was it age, overload, water ingress, pest damage, or poor previous workmanship? Understanding the root cause means we can recommend the right repair and prevent it from happening again.

Step 5: Transparent Quote

Before we carry out any repairs, we explain exactly what's wrong, what needs to be done, and how much it'll cost. No surprises, no hidden fees, no jargon. Just clear, upfront pricing.

Step 6: Compliant Repair

Once you give the go-ahead, we carry out the repair to AS/NZS 3000 (the Australian Wiring Rules) and any other relevant standards. We use quality components, take pride in our workmanship, and clean up after ourselves.

Step 7: Testing and Certification

After the repair, we thoroughly test everything to confirm the fault is resolved and the circuit is safe. Where required, we issue an Electrical Safety Certificate, providing documented proof that the work was done properly by a licensed electrician.

This structured approach has earned us a reputation for excellence across Perth. Every job is completed by our team of professional electricians who live locally and understand the unique needs of WA homes.

24/7 Emergency Electrical Fault Finding and Repairs in Perth

Electrical emergencies don’t wait for business hours. A power outage at 11pm, a burning smell from your switchboard at 3am, or a sparking power point during dinner, these are situations when you need a licensed Perth electrician now, not tomorrow morning.

We provide 24/7 emergency electrical fault finding and repairs across the Perth metropolitan area, including:

After-hours callouts
Weekend emergency repairs
Public holiday service
Same-day appointments for urgent issues
Rapid response for landlords, real estate agents, and property managers
Commercial emergency support for businesses with power-critical operations

When you call 0469 800 094, you’re speaking to a licensed Perth electrician — not a call centre. We respond quickly, communicate clearly, and prioritise genuine emergencies. If you’re without power, smelling burning, or seeing sparks, switch off the main switch at your switchboard if it’s safe to do so, and call us immediately.

Signs You Need to Call a Perth Electrician for Fault Finding

Not sure if what you’re experiencing actually needs a professional electrician? Here are the clearest signs you should pick up the phone and call us on 0469 800 094:

Your safety switch keeps tripping and won't reset
You smell burning plastic or notice a burning odour from any electrical outlet, switchboard, or appliance
You see sparks from a power point, switch, or fitting
Power points or light switches feel warm or hot to the touch
Lights flicker, dim, or buzz without explanation
You've lost power to part of your property but not all of it
Appliances are blowing fuses or behaving erratically
You hear buzzing, humming, or crackling sounds from your switchboard
Your circuit breakers are tripping repeatedly
You're seeing discoloured, scorched, or melted power points or switches
Your property has old ceramic fuses, an asbestos switchboard, or rubber-insulated wiring
You've experienced an electrical shock from any fitting or appliance
You're buying or selling a property and need a safety inspection
You're a landlord needing rental compliance certification

If any of these situations sound familiar, don’t hesitate to act. Electrical faults usually don’t fix themselves, and unfortunately, they often become worse and more dangerous as time goes on.

Why Choose Advanced Electrical
and Energy Solutions

Easy booking and fast support via call 0469 800 094, email admin@advancedelectricianperth.com.au, or our online contact form for quick quotes and scheduling.

Contact Advanced Electrical and Energy Solutions

If you need electrical fault-finding or electrical repairs in Perth, contact Advanced Electrical and Energy Solutions today. Our licensed electricians are ready to provide safe, professional and reliable electrical repairs for residential and commercial properties.

Do not ignore electrical warning signs. A small fault can become a serious safety issue if left untreated.

Call: 0469 800 094 Email: admin@advancedelectricianperth.com.au Or send your enquiry through our website contact form.

Frequently Asked Questions - Electrical Fault Finding and Repairs Perth

How quickly can you get to my property?

For emergencies, we aim for same-day response across the Perth metro area, and often within a couple of hours. For non-urgent fault finding, we typically book within 24 to 48 hours.

Are you licensed and insured?

Yes. We hold WA Electrical Contractor licence EC16860 and carry full public liability insurance. We can provide documentation on request.

Do you work on commercial properties as well as homes?

Absolutely. We handle residential, commercial, industrial, and strata electrical fault finding and repairs across Perth.

Will you provide a written quote before doing the work?

Yes. We always explain the fault, the proposed fix, and the cost before we start work. You’re never billed for anything you haven’t approved.

What if you can't find the fault?

Our diagnostic process is methodical and thorough. In the rare case that a fault is intermittent or exceptionally complex, we’ll explain what we’ve ruled out, what we suspect, and how we recommend proceeding. We don’t charge you for repairs that don’t fix the problem.

Do you guarantee your work?

Yes. All our workmanship is guaranteed. If a repair we’ve carried out has an issue related to our workmanship, we come back and put it right at no cost.

Can you fix faults in older Perth homes with ceramic fuses or aluminium wiring?

Yes, and we strongly recommend upgrading these systems to modern, safer standards. We can repair the immediate fault and discuss long-term safety upgrades with you.

Do you offer fault-finding for landlords and property managers?

Yes. We work with many Perth property managers and landlords on rental compliance, fault repairs, smoke alarm certification, and RCD compliance.