FAQ's
What is included in an electrical compliance and safety check in Perth?
An electrical compliance and safety check generally involves inspecting the switchboard, RCD safety switches, smoke alarms, power points, lighting circuits, and visible signs of damage or non-compliance. The specific scope varies depending on whether the property is residential, rental, or commercial. At Advanced Electrical and Energy Solutions, we customise the inspection to suit your property and clearly explain if any repairs, upgrades, or further testing are required.
Do I need electrical safety checks before renting out a property in Perth?
Yes, rental properties in WA must meet key electrical safety standards. WA guidelines specify that a rental home needs two RCDs installed before leasing, and compliant smoke alarms must be installed and maintained. Smoke alarms are typically mains powered, functional, and less than 10 years old.
Do I need compliant smoke alarms and RCDs before selling my home in Perth?
Yes. WA guidance states that homes being sold must have properly installed RCD protection on circuits supplying power points and lights before transfer of ownership, and smoke alarms must be compliant, in working order, mains powered, and not more than 10 years old.
How often should RCDs be tested?
For rental homes, WA consumer guidance states tenants should test RCDs every three months and report any faults, while faulty RCDs must be replaced immediately. For workplaces, WorkSafe WA states RCDs need to be tested regularly by a competent person, with frequency determined by risk assessment or advice from a qualified individual.
What is an electrical safety certificate in WA?
An electrical safety certificate is a document issued by the electrical contractor for applicable electrical installation work. WA guidance says it confirms the work was carried out by a licensed contractor, is safe and complies with safety standards. For eligible work, the certificate must be given to the customer within 28 days.
Can you check older homes in Perth for electrical safety?
Yes. Older homes are some of the most important properties to inspect because they may have ageing switchboards, limited RCD protection, worn fittings, or other outdated electrical components. We offer practical electrical safety checks for older Perth homes and can recommend upgrades where necessary to enhance safety and reliability.
Do businesses in Perth need electrical compliance checks?
Commercial properties should take electrical safety seriously. While requirements vary by site and use, WorkSafe WA makes clear that workplaces have duties to manage electrical risks, and RCDs used in workplaces must be tested regularly by a competent person.
How much do electrical compliance and safety checks cost in Perth?
The price varies depending on the type of property, the size of the installation, whether it is residential or commercial, and whether you require a basic compliance check or a more detailed fault finding and testing. The best way to get an accurate quote is to contact us with your property details. We will provide you with clear advice and a straightforward quote based on your actual needs.
Why should I use a licensed electrician for compliance checks?
In WA, electrical work must be performed by a person holding the relevant electrical licence, and contractor licences are marked with the prefix EC. Using a licensed electrician helps ensure the work is completed safely, tested properly, and documented correctly where required.
Do you provide electrical compliance and safety checks across Perth?
Yes. We offer electrical compliance and safety inspections for residential and commercial clients across Perth. Whether you need a landlord safety check, a pre-sale inspection, a switchboard review, or a commercial compliance assessment, we can assist.
How much does garden lighting installation cost in Perth?
The cost of garden lighting installation in Perth varies based on the number of lights, the type of fittings, cable runs, access to the area, and whether you want extras like timers, sensors, or smart controls. Simple setups typically cost less than comprehensive outdoor lighting systems with pathway lights, feature lights, and new wiring.
Do I need a licensed electrician for garden lighting installation in Perth?
Yes. In Western Australia, electrical work must be performed by qualified tradespeople licensed to operate in WA and employed by a licensed electrical contractor. This is why professional garden lighting installation in Perth should always be completed by a licensed electrician.
What is the best type of garden lighting for Perth homes?
The best garden lighting for Perth homes usually depends on the area you want to enhance. Many property owners opt for a mix of pathway lighting, LED garden lights, feature spotlights, deck lighting, and outdoor entertaining area lighting to improve safety, appearance, and usability.
Are LED garden lights a good option for outdoor lighting?
Yes. LED garden lighting is very popular because it is energy-efficient, durable, and comes in many styles for pathways, gardens, decks, and entertaining areas. LED fittings are widely promoted across Perth outdoor lighting services because they provide strong performance while using less power.
Can you install pathway lighting in gardens and around walkways?
Yes. Installing pathway lighting in Perth is a common choice for front paths, side access areas, garden walkways, and backyard paths. It enhances visibility, boosts safety at night, and gives a neater look to outdoor spaces.
Can garden lighting improve safety and security around the home?
Yes. Professionally installed garden lighting enhances visibility around paths, steps, entry points, and outdoor living areas, while also minimising dark spots around the property. This makes it easier to move around the home at night and can create a safer outdoor environment.
Can outdoor garden lights be connected to sensors, timers, or smart controls?
Yes. Many modern garden lighting systems in Perth can be fitted with timers, motion sensors, or smart controls. These features make outdoor lighting more convenient, help reduce unnecessary power use, and enable lights to operate only when needed.
Are garden lights required to be weatherproof for outdoor use?
Yes. Outdoor and garden lighting should be suitable for external conditions and installed correctly for safe long-term performance. Perth outdoor lighting service pages commonly highlight weatherproof circuits and IP-rated fittings, which is important for durability in exposed outdoor areas.
Can you upgrade or replace old garden lighting?
Yes. We can upgrade old, damaged, or outdated outdoor lighting and replace it with modern LED garden lighting, pathway lights, feature lighting, or smarter control systems. This is a great way to improve the look, efficiency, and functionality of your outdoor area without starting from scratch.
What areas can be included in a garden lighting installation?
A professional garden lighting installation in Perth can include front gardens, backyard landscaping, pathways, driveways, patios, decks, pergolas, alfresco areas, retaining walls, feature trees, and outdoor entertaining spaces. A tailored design helps make sure the lighting suits both the layout and the way the space is used.
How Much Does Electric Hot Water System Supply & Install Cost in Perth?
Costs vary according to system type, capacity, and complexity. Current 2026 Perth pricing guide:
- Small 25–50 L electric storage (unit + install): $900–$1,400
- Standard 125–250 L electric storage (most common family size): $1,600–$2,800
- Electric continuous flow (instantaneous): $1,800–$3,200
- Electric heat pump systems: $3,500–$5,500 (after STC discounts)
Installation costs typically range from $400 to $900, depending on location, existing plumbing, and whether additional electrical upgrades (such as safety switches or circuit breakers) are required. We always provide a fixed price upfront.
Pro tip: Switching to an off-peak tariff with Synergy can reduce your running costs by up to 50 %. We can advise on the best tariff for your new system.
What is the Common Electric Hot Water Problems you can Fix Fast
- No hot water or lukewarm water
- Leaking tanks or valves
- Tripping safety switches
- Strange noises (rumbling or banging)
- Low pressure or slow flow
- Thermostat or element failure
Do I need an electrician or a plumber for an electric hot water system in Perth?
For most electric hot water jobs in Perth, you’ll usually need both trades. A plumber handles the water side (pipes, valves, tank connection), while we handle the electrical supply, dedicated circuit, isolation switch, protection and testing. If you’re replacing a unit, we’ll coordinate the electrical work so everything is safe, compliant and reliable.
Why is my electric hot water system not heating properly?
If your water is cold or only lukewarm, the cause is often electrical: a failed element, faulty thermostat, tripped breaker/RCD, loose wiring, or off-peak control issues. We complete proper fault finding instead of guessing, then repair what’s actually wrong. Our approach restores hot water faster and helps prevent repeat failures.
My hot water system keeps tripping the breaker or RCD, what does it mean?
Frequent tripping usually indicates a real electrical fault, such as moisture in the element, insulation breakdown, damaged wiring, or overheating terminations. It can be unsafe to keep resetting it. We’ll test the circuit, check protection devices, and inspect connections to identify the source. Then we’ll fix it properly so your system runs safely.
Can you provide same-day emergency help if we have no hot water?
Yes, we offer 24/7 emergency electrical service in Perth, and we prioritise “no hot water” call-outs where possible. We’ll quickly assess whether it’s a simple reset issue, a failed component (element/thermostat), or a bigger wiring/protection problem. Our goal is to get you back to reliable hot water with safe, licensed workmanship.
Do you supply and install electric hot water systems, or only do the electrical connection?
We can assist with electric hot water system supply and installation support, focusing on the electrical side: correct circuit sizing, isolation, RCD protection (where required), and compliant connection and testing. For full replacements, a licensed plumber may handle the water connection, while we ensure the electrical install is safe, tidy and built to last.
What size electric hot water system is best for Perth households?
Choosing the right size depends on the number of people, showers per day, peak usage times, and whether you use off-peak heating. As a guide, smaller households may suit smaller tanks, while families often need higher capacity to avoid running out. We’ll help you match the system load and circuit requirements so it performs properly.
Is off-peak electric hot water worth it in Perth, and can you check my setup?
Off-peak can reduce running costs, but it must be set up correctly and sized for your daily usage. If you’re constantly out of hot water, you may have a tariff/control issue, a heating fault, or a system that’s too small. We can test the electrical side, confirm your wiring and controls, and advise on practical options.
Can an old switchboard cause hot water problems or stop a new unit being installed?
Yes. Older switchboards may have limited capacity, outdated protection, or poor wiring that can affect hot water reliability. If you’re upgrading to a new unit (especially higher load systems), we may recommend a switchboard assessment to ensure the circuit can handle the demand safely. We can complete upgrades, RCD protection and circuit work as needed.
What’s the difference between electric storage, heat pump, and instantaneous electric hot water?
Electric storage heaters heat water in a tank and are common in Perth homes. Heat pumps are energy-efficient but still require a suitable electrical supply and protection. Instantaneous electric units can draw higher power and may need upgraded cabling and protection. We help you understand the electrical requirements so your chosen system is safe, compliant and reliable in the long term.
How do we know if we should repair or replace our electric hot water system?
If your system is leaking, repeatedly tripping the power, producing rusty water, or failing often, replacement may be the smarter option. If it’s a single component failure (such as an element or thermostat), a repair can be cost-effective. We’ll inspect, test and explain the options clearly, so you can choose the best path for your home or property.
How much does security camera installation cost in Perth?
The cost of security camera installation in Perth varies depending on the number of cameras, the size of the property, whether you require a wired or wireless setup, recording needs, remote viewing capabilities, and the complexity of the installation. A small home generally needs a simpler system than a larger house, office, warehouse, or retail premises. For the best outcome, we recommend obtaining a customised quote based on your layout and security objectives.
What is the best security camera system for a home in Perth?
The best home security camera system in Perth varies based on your property’s size, access points, lighting conditions, and specific areas you wish to monitor. Many Perth homeowners opt for cameras at front doors, driveways, garages, side entrances, and backyards. A professionally designed system offers better coverage, fewer blind spots, and more dependable performance compared to a basic off-the-shelf setup.
What is the best CCTV setup for a business in Perth?
The best commercial CCTV installation in Perth depends on your business type, operating hours, entry points, stock areas, customer zones, car parks, and internal access areas. Offices, retail stores, warehouses, workshops, and hospitality venues all require different camera layouts. A well-designed business system should focus on visibility, recording reliability, and practical day-to-day monitoring.
How many security cameras do I need for my house or business?
The number of cameras depends on your property’s size and layout, covering areas like entries, driveways, backyards, internal zones, car parks, and perimeters. Proper placement is more important than quantity.
Are wired or wireless security cameras better?
Both options can work well, but they suit different situations. Wired security cameras are often preferred for long-term reliability and stable performance, especially on larger homes and commercial sites. Wireless security cameras can be a good choice where flexibility and easier placement are important. The best option depends on your property, the signal environment, and how you want the system to perform over time.
Can I view my security cameras on my phone?
Yes, we provide commercial lighting installation across Perth for offices, retail spaces, work areas, shops, and other business premises.
Do security cameras work at night?
Yes. Many modern systems feature night vision or low-light functions to enhance visibility after dark. This is particularly important for driveways, front entrances, side access points, car parks, loading zones, and building boundaries. If your property requires dependable overnight surveillance, cameras with night vision should be included in the recommended setup.
Can you upgrade or replace an old CCTV system?
Yes. If your existing system has blurry footage, unreliable recording, poor night vision, outdated cameras, black spots, or limited remote access, an upgrade might be the best option. Usually, you don’t need to replace everything from scratch. A professional assessment can determine whether your current system can be improved, expanded, or replaced with a better modern solution.
Are there privacy rules for CCTV cameras in Perth businesses?
Yes. Businesses should install CCTV carefully and use it appropriately. Australian government guidance says cameras should be clearly visible, signs should be placed at entrances, staff should be informed, and cameras should not be installed in private areas such as toilets, showers, fitting rooms, or change rooms. This is important for both compliance and customer trust.
Do I need a licensed installer for security cameras in Western Australia?
When installing CCTV in WA for security, the installer must have the appropriate Security Installer licence. If electrical work is involved, the correct electrical licensing requirements also apply. The WA government states that CCTV for security is regulated under the security installer licensing framework, with specific electrical licensing rules for work involving CCTV systems and connected equipment.